olimex@a20-olinuxino:~$ sudo /sbin/olinuxino-sd-to-sata 

Detecting board...

Detecting the root device...
Root partition:		/dev/mmcblk0p1
Root device:		/dev/mmcblk0

Detecting SATA device...
SATA partition:		/dev/sda1
SATA device:		/dev/sda

Checking disk size...
Required blocks:	1355024
Available blocks:	250069680

Unmount target device...
umount: /dev/sda1: not mounted.

Copying MBR record...

Resizing partition...
e2fsck 1.44.5 (15-Dec-2018)
ext2fs_open2: Bad magic number in super-block
e2fsck: Superblock invalid, trying backup blocks...
e2fsck: Bad magic number in super-block while trying to open /dev/sda1

The superblock could not be read or does not describe a valid ext2/ext3/ext4
filesystem.  If the device is valid and it really contains an ext2/ext3/ext4
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
    e2fsck -b 8193 <device>
 or
    e2fsck -b 32768 <device>

resize2fs 1.44.5 (15-Dec-2018)
resize2fs: Bad magic number in super-block while trying to open /dev/sda1
Couldn't find valid filesystem superblock.

Formating disk...

Copying disk...
    632,730,175  99%    6.06MB/s    0:01:39 (xfr#21054, to-chk=0/26998)   

Configuring...

Cleanup...
Writing u-boot-sunxi-with-spl